Carlow Tenement - Phase One Drilling Completed - Artemis Resources Limited | RNS

⌘K

Carlow Tenement - Phase One Drilling Completed - Artemis Resources Limited | RNS | Ticker

RNS Number : 1669B

Artemis Resources Limited

19 March 2025

The information contained within this announcement is deemed to constitute inside information as stipulated under the Market Abuse Regulation ("MAR") (EU) No. 596/2014, as incorporated into UK law by the European Union (Withdrawal) Act 2018. Upon the publication of this announcement, this inside information is now considered to be in the public domain.

19 March 2025

PILBARA GOLD - CARLOW TENEMENT

Phase one DRILLING COMPLETED

_______________________________________________________________________________

Artemis Resources Limited ("Artemis" or "the Company") (ASX/AIM:ARV) is pleased to announce completion of the first phase of drilling (reported on 28 January 2025) to test three previously undrilled, high priority gold targets on the Carlow Tenement.

Highlights

· Five diamond holes were completed during Phase 1 for a total 1,790m drilled

· Drilling tested three high priority gold targets within a >4km long corridor centred around the Company's Carlow gold/copper deposit

· Target areas drilled:

o Titan gold prospect, 2km northwest of the Carlow deposit

o Marillion EM target, 800m east of the Carlow deposit

o Potential extensions down plunge from the Carlow deposit

· All three holes at Titan intersected a wide zone of hydrothermal alteration and veining in an ultramafic sequence down dip from a surface gold occurence¹

· The base of the Titan ultramafic sequence is intruded by a porphyry sill and overlies strongly altered, brecciated and veined metasediments and chert

· pXRF² readings of drill core from Titan recorded at 1m intervals across the alteration zone identified highly elevated levels of arsenic in all three holes

· Arsenic can be associated with gold mineralisation, notably in the emerging north Pilbara gold province and including at Artemis's Carlow deposit

· Re-modelling of geophysical data confirms the Titan holes were drilled across a regional northwest trending structure with no previous drilling

· Both drill holes completed at the Marillion and Carlow extension targets intersected zones of vein hosted, stringer and semi massive sulphides

· Numerous samples of drill core from the five drill holes have been sent for assay with results expected in coming weeks

· Note¹ - Refer to previous Artemis announcements regarding surface gold occurrences at Titan Prospect, listed in Table 1 in this announcement

· Note² - The following Disclaimer relates to pXRF readings referred to in this announcement, listed in Table 2 and further defined in JORC Table 1:

"The exploration results reported herein include portable X-ray fluorescence (pXRF) measurements, which are considered preliminary and semi-quantitative in nature. The pXRF data have not been verified by independent laboratory assays. The pXRF results should not be considered as a substitute for traditional laboratory analysis, and caution should be exercised when interpreting these results. The Competent Person has reviewed the data and believes the data provide a reasonable indication of geochemical signature of certain geological units subject to confirmation by further analytical methods.

Commenting on the drilling program, Managing Director Julian Hanna said:

"I am pleased to report completion of the Phase 1 drilling program targeting gold at the Carlow Tenement in line with our announcement on 28 January 2025. Five holes for a total of 1,790m were drilled at the Titan prospect, the Marillion conductor and as an initial test of possible extensions down plunge from the Carlow deposit.

The drilling program was successful for several reasons. Firstly, it provided very encouraging early indications from the Titan prospect where high-grade surface gold occurrences¹ were announced in 2024 from samples of quartz/ironstone veins and chert outcrops in four different areas at Titan. While we await assay results to confirm if gold has been intersected at Titan, wide zones of alteration, quartz veining and brecciation were reported in drill core from the three holes drilled to date.

Visual observations of hydrothermal-type alteration and intensive veining at Titan are supported by systematic pXRF² readings of drill core from the three Titan holes. pXRF readings² include highly elevated arsenic values (up to 3,460ppm arsenic)directly above the contact between an ultramafic sequence and an interpreted porphyry intrusion. (Refer to Figure 4 and Table 2). If gold is associated with arsenic at Titan, this may open-up potential well beyond the area drilled to date.

Drilling at Marillion and Carlow was also successful, intersecting several zones of vein hosted, stringer and semi-massive pyrrhotite with locally visible chalcopyrite sulphide within the target basalt and underlying chert sequence.

Overall, this initial drilling program is already changing our understanding of the geological and structural setting as well as the wider gold potential of this highly mineralised area. Numerous samples from the five diamond holes have been sent for assay and we look forward to announcing results in the near future."

Drilling Summary

The Phase I drilling program commenced in early February using locally based drilling contractor West Core Drilling. Diamond drilling started from surface and was effective in providing drill core through the surface oxidation profile, hydrothermal alteration zones and into silicified metasediments which include quartz veins and chert units. Five drill holes were completed over a five-week period for a total 1,790m drilled.

Three holes were drilled as an initial test of the Titan gold prospect located 2km northwest of the Carlow deposit. The holes were drilled down dip from one of four known surface gold occurrences¹ discovered in 2024. (Refer to Figures 3 and 4).

pXRF readings² of the Titan drill core taken at 1m intervals has defined a continuous zone with elevated levels of arsenic near the base of an ultramafic sequence which displays local spinifex textures, green chrome micas and elevated chromium in pXRF readings². (Refer to Figure 4 and Table 2). Assays are awaited to determine if gold is associated with the elevated arsenic in pXRF readings² in the three Titan drill holes.

In addition to Titan, one hole was drilled to test the large Marillion EM conductor 800m east of the Carlow deposit, and one hole was drilled to scope out the potential for extensions down plunge from previous high-grade gold intersections in the Carlow deposit. (Refer to Figure 5). The Marillion and Carlow extension holes both intersected zones of visible pyrrhotite sulphide containing local intervals of chalcopyrite within the target basalt and chert sequence.

A map of a region AI-generated content may be incorrect.

Figure 1: Artemis tenements in Pilbara region of Western Australia with Carlow Tenement hatched

Figure 2: Carlow Tenement - gravity image showing: Titan gravity low feature (blue), location of high-grade surface gold occurrences¹ sampled from quartz/Fe veins and chert outcrops, area of recent drilling at Titan (yellow circle), outline of Carlow deposit and Marillion EM target.

Figure 3: Carlow Tenement - interpreted key elements of the Regal thrust zone showing: chert outcrops (brown), major thrusts (black), Titan gravity-low feature (purple) extending >7km across Carlow Tenement, area of recent drilling at Titan (yellow circle), interpreted gravity-high anomalies (G1-G3) and EM conductive plates (C1-C5).

Figure 4: Titan drill section - interpreted cross section looking north-west showing three sequences interpreted from drill core and the high arsenic zone based on pXRF readings². (Refer to Table 2)

A map of a gold mine AI-generated content may be incorrect.

Figure 5. Long section through Carlow gold/copper deposit and Marillion Electro Magnetic (EM) conductor showing the two diamond drill holes completed in the Phase 1 program.

Contacts:

Artemis Resources Ltd

Guy Robertson, Chairman

Julian Hanna, Managing Director

info@artemisresources.com.au

Zeus (Nomad & Broker)

Antonio Bossi / James Bavister /

Gabriella Zwarts

Tel: +44 20 3829 5000

Competent Person Statement

The information in this report that relates to Exploration Results was compiled by Mr Julian Hanna, a Competent Person who is a member of the Australasian Institute of Mining and Metallurgy (MAusIMM). Mr Hanna is Managing Director of Artemis Resources Ltd and has sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration and to the activity being undertaken to qualify as a Competent Person as defined in the 2012 Edition of the 'Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves". Mr Hanna consents to the inclusion in this report of the matters based on his information in the form and context in which it appears.

No New Information

To the extent that this announcement contains references to prior exploration results which have been cross referenced to previous market announcements made by the Company, unless explicitly stated, no new information is contained. The Company confirms that it is not aware of any new information or data that materially affects the information included in the relevant market announcements and, in the case of estimates of Mineral Resources, that all material assumptions and technical parameters underpinning the estimates in the relevant market announcements continue to apply and have not materially changed.

About Artemis Resources

Artemis Resources (ASX/AIM:ARV) is a gold, copper and lithium focused resources company with a highly attractive suite of projects in Western Australia's underexplored North Pilbara Gold Province.

· Attractive projects:

o Gold/Copper - The Karratha Gold Project (100%) with multiple prospects including the Carlow gold/copper project and The Paterson Gold/Copper Project.

o Lithium - Mt Marie Lithium and Osborne East prospects (100%), & Osborne Lithium JV (49%);

· Highly strategic location: Tier 1 jurisdiction, close proximity to major hub at Karratha including regional rail and road infrastructure, administrative centre and the Dampier Port

· Significant exploration upside: highly prospective tenure package in the Pilbara Region of Western Australia which is the next frontier for battery minerals growth

· Mineral Resource with growth potential: existing high-grade gold-copper-cobalt Inferred Mineral Resource at Carlow (100%-owned tenure)

· Established processing site at Radio Hill: strategically located, fully permitted

· IOCG Exploration Target: Artemis has applied for a 340km² exploration licence over a large interpreted magnetic intrusion considered prospective for IOCG type copper/gold, located 440km east of Kalgoorlie. The application is expected to be granted in mid 2025

Note 1: Artemis ASX announcements relating to surface rock chip results from the Karratha Gold Project referred to in this announcement:

High grade rock chip gold assays, 12 June 2024

High grade gold vein discovery at Titan prospect, 16 August 2024

High grade gold vein discovery at Titan prospect amended, 16 August 2024

Titan prospect results - clarification statement, 17 September 2024

Titan delivers further high-grade rock chip results, 10 October 2024

New Regional Discovery High-Grade Cu, Au, Ag Chapman Prospect, 6 December 2021

Appendix

Table 1: Drill hole details.

Project	HoleID	Easting	Northing	Grid	Azi	Dip	EOH
Carlow Extensions	25ARDD002	507832	7698267	GDA94 MGA zone 50	340	-50	527.4
Marillion	25ARDD001	508346	7698466	GDA94 MGA zone 50	0	-70	714.6
Titan East	25ARDD003	505827	7699444	GDA94 MGA zone 50	45	-50	148.4
Titan East	25ARDD004	505812	7699429	GDA94 MGA zone 50	45	-65	162.5
Titan East	25ARDD005	505783	7699400	GDA94 MGA zone 50	45	-70	237.3

Hole ID	From	To	As_ppm	As error	Cr_ppm	Cr Error	Hole ID	From	To	As_ppm	As error	Cr_ppm	Cr Error
25ARDD003	0	1	22	2	902	44	25ARDD003	30	31	91	2	1037	35
25ARDD003	1	2	<LOD	8	1806	55	25ARDD003	31	32	357	5	1237	34
25ARDD003	2	3	<LOD	6	407	29	25ARDD003	32	33	8	2	<LOD	129
25ARDD003	3	4	23	2	2547	49	25ARDD003	33	34	175	3	642	28
25ARDD003	4	5	11	1	346	25	25ARDD003	34	35	60	2	656	30
25ARDD003	5	6	16	1	1868	45	25ARDD003	35	36	275	3	679	27
25ARDD003	6	7	34	2	5183	74	25ARDD003	36	37	62	2	576	30
25ARDD003	7	8	6	1	405	30	25ARDD003	37	38	20	1	848	33
25ARDD003	8	9	45	2	2584	55	25ARDD003	38	39	459	6	1979	37
25ARDD003	9	10	116	3	5226	70	25ARDD003	39	40	10	1	177	21
25ARDD003	10	11	8	1	1804	47	25ARDD003	40	41	7	1	63	18
25ARDD003	11	12	88	2	6010	82	25ARDD003	41	42	5	1	49	16
25ARDD003	12	13	302	4	3540	59	25ARDD003	42	43	<LOD	8	<LOD	96
25ARDD003	13	14	316	5	3108	53	25ARDD003	43	44	<LOD	5	<LOD	69
25ARDD003	14	15	270	4	2208	48	25ARDD003	44	45	4	1	<LOD	69
25ARDD003	15	16	653	8	1171	42	25ARDD003	45	46	<LOD	6	<LOD	83
25ARDD003	16	17	289	5	4413	68	25ARDD003	46	47	<LOD	5	<LOD	68
25ARDD003	17	18	253	3	3275	43	25ARDD003	47	48	<LOD	5	<LOD	75
25ARDD003	18	19	192	4	2339	52	25ARDD003	48	49	16	2	69	22
25ARDD003	19	20	95	2	2509	47	25ARDD003	49	50	<LOD	5	<LOD	72
25ARDD003	20	21	106	3	3486	62	25ARDD003	50	51	<LOD	5	<LOD	71
25ARDD003	21	22	75	2	1151	35	25ARDD003	51	52	<LOD	5	<LOD	67
25ARDD003	22	23	326	4	1528	35	25ARDD003	52	53	<LOD	5	<LOD	76
25ARDD003	23	24	231	4	1141	34	25ARDD003	53	54	<LOD	5	70	20
25ARDD003	24	25	111	3	4292	66	25ARDD003	54	55	<LOD	5	49	17
25ARDD003	25	26	257	4	2572	46	25ARDD003	55	56	<LOD	5	<LOD	70
25ARDD003	26	27	199	4	2057	56	25ARDD003	56	57	4	1	<LOD	84
25ARDD003	27	28	601	8	2380	48	25ARDD003	57	58	<LOD	6	<LOD	87
25ARDD003	28	29	630	8	2337	47	25ARDD003	58	59	<LOD		<LOD
25ARDD003	29	30	775	10	2527	52	25ARDD003	59	60	<LOD	2	<LOD	16
Hole ID	From	To	As_ppm	As error	Cr_ppm	Cr Error	Hole ID	From	To	As_ppm	As error	Cr_ppm	Cr Error
25ARDD003	60	61	<LOD		621		25ARDD003	90	91	9	1	408	27
25ARDD003	61	62	9	1	599	24	25ARDD003	91	92	23	2	381	25
25ARDD003	62	63	6	2	667	19	25ARDD003	92	93	8	1	352	24
25ARDD003	63	64	15	3	575	24	25ARDD003	93	94	8	1	57	19
25ARDD003	64	65	6	4	1203	39	25ARDD003	94	95	36	2	891	32
25ARDD003	65	66	37	3	1061	16	25ARDD003	95	96	12	1	65	19
25ARDD003	66	67	15	3	627	26	25ARDD003	96	97	11	1	351	25
25ARDD003	67	68	12	2	622	25	25ARDD003	97	98	12	1	331	26
25ARDD003	68	69	10	3	273	17	25ARDD003	98	99	18	1	290	23
25ARDD003	69	70	50	2	610	22	25ARDD003	99	100	35	2	251	23
25ARDD003	70	71	55	4	544	16	25ARDD003	100	101	35	2	807	31
25ARDD003	71	72	6	3	432	16	25ARDD003	101	102	10	1	566	29
25ARDD003	72	73	9	2	196	17	25ARDD003	102	103	11	1	754	32
25ARDD003	73	74	<LOD	5	57	19	25ARDD003	103	104	5	1	651	30
25ARDD003	74	75	<LOD	6	<LOD	82	25ARDD003	104	105	43	2	377	23
25ARDD003	75	76	<LOD	1	88	77	25ARDD003	105	106	40	2	600	28
25ARDD003	76	77	4	1	<LOD	19	25ARDD003	106	107	25	1	589	28
25ARDD003	77	78	7	1	69	23	25ARDD003	107	108	3	1	281	24
25ARDD003	78	79	13	3	142	42	25ARDD003	108	109	14	1	473	28
25ARDD003	79	80	104	3	1407	31	25ARDD003	109	110	88	2	580	27
25ARDD003	80	81	24	2	601	33	25ARDD003	110	111	42	2	517	26
25ARDD003	81	82	6	1	526	71	25ARDD003	111	112	7	1	357	24
25ARDD003	82	83	4	1	<LOD	23	25ARDD003	112	113	31	1	506	26
25ARDD003	83	84	4	5	342	19	25ARDD003	113	114	53	2	655	29
25ARDD003	84	85	<LOD	1	140	20	25ARDD003	114	115	43	2	416	26
25ARDD003	85	86	<LOD	4	93	18	25ARDD003	115	116	7	1	740	32
25ARDD003	86	87	28	2	397	23	25ARDD003	116	117	3	1	652	31
25ARDD003	87	88	<LOD	5	111	20	25ARDD003	117	118	21	1	465	27
25ARDD003	88	89	6	1	249	21	25ARDD003	118	119	19	1	431	26
25ARDD003	89	90	<LOD	5	412	24	25ARDD003	119	120	<LOD	5	459	27
Hole ID	From	To	As_ppm	As error	Cr_ppm	Cr Error	Hole ID	From	To	As_ppm	As error	Cr_ppm	Cr Error
25ARDD003	120	121	50	2	535	27	25ARDD004	1	2	6	2	768	30
25ARDD003	121	122	67	2	533	27	25ARDD004	2	3	8	1	275	22
25ARDD003	122	123	45	2	568	26	25ARDD004	3	4	17	5	386	24
25ARDD003	123	124	18	1	712	27	25ARDD004	4	5	<LOD	1	348	29
25ARDD003	124	125	25	2	603	28	25ARDD004	5	6	4	6	482	31
25ARDD003	125	126	32	1	614	28	25ARDD004	6	7	<LOD	5	538	29
25ARDD003	126	127	40	2	657	30	25ARDD004	7	8	<LOD	6	488	29
25ARDD003	127	128	46	2	661	29	25ARDD004	8	9	<LOD	2	483	36
25ARDD003	128	129	83	2	392	25	25ARDD004	9	10	45	1	1113	28
25ARDD003	129	130	31	2	685	31	25ARDD004	10	11	8	6	503	34
25ARDD003	130	131	13	1	200	22	25ARDD004	11	12	<LOD	1	473	33
25ARDD003	131	132	83	2	376	24	25ARDD004	12	13	9	1	609	60
25ARDD003	132	133	4	1	361	25	25ARDD004	13	14	7	2	2738	32
25ARDD003	133	134	7	1	233	22	25ARDD004	14	15	48	2	1135	43
25ARDD003	134	135	33	2	434	25	25ARDD004	15	16	49	2	2678	54
25ARDD003	135	136	149	3	689	29	25ARDD004	16	17	65	3	4409	50
25ARDD003	136	137	5	1	523	29	25ARDD004	17	18	105	1	2974	38
25ARDD003	137	138	14	1	261	22	25ARDD004	18	19	139	3	5182	58
25ARDD003	138	139	48	2	512	27	25ARDD004	19	20	136	4	4595	64
25ARDD003	139	140	11	1	452	29	25ARDD004	20	21	216	2	4827	25
25ARDD003	140	141	29	2	353	25	25ARDD004	21	22	53	2	511	40
25ARDD003	141	142	10	1	543	28	25ARDD004	22	23	45	2	2577	38
25ARDD003	142	143	5	1	458	26	25ARDD004	23	24	49	2	2400	49
25ARDD003	143	144	<LOD	5	233	22	25ARDD004	24	25	63	1	4296	26
25ARDD003	144	145	4	1	575	29	25ARDD004	25	26	9	2	689	37
25ARDD003	145	146	9	1	406	26	25ARDD004	26	27	29	1	1498	28
25ARDD003	146	147	<LOD	5	279	23	25ARDD004	27	28	11	3	568	46
25ARDD003	147	148	3	1	734	32	25ARDD004	28	29	96	3	3117	43
25ARDD003	148	148.4	<LOD	5	533	27	25ARDD004	29	30	94	7	3139	27
25ARDD004	0	1	11	1	654	37	25ARDD004	30	31	167	1	1298	27
Hole ID	From	To	As_ppm	As error	Cr_ppm	Cr Error	Hole ID	From	To	As_ppm	As error	Cr_ppm	Cr Error
25ARDD004	31	32	4	1	479	20	25ARDD004	61	62	107	2	5755	55
25ARDD004	32	33	34	3	343	119	25ARDD004	62	63	107	4	4180	62
25ARDD004	33	34	84	2	14175	22	25ARDD004	62	63	107	4	4180	62
25ARDD004	34	35	49	3	442	60	25ARDD004	63	64	158	2	3686	57
25ARDD004	35	36	62	4	5034	60	25ARDD004	64	65	48	1	3262	53
25ARDD004	36	37	127	4	5158	38	25ARDD004	65	66	9	1	2765	67
25ARDD004	37	38	138	3	2289	26	25ARDD004	66	67	16	26	4438	21
25ARDD004	38	39	107	1	601	17	25ARDD004	67	68	3079	1	396	36
25ARDD004	39	40	33	2	215	86	25ARDD004	68	69	26	1	1067	23
25ARDD004	40	41	95	1	7243	81	25ARDD004	69	70	9	1	180	19
25ARDD004	41	42	7	2	6705	25	25ARDD004	70	71	3	1	111	23
25ARDD004	42	43	68	1	568	64	25ARDD004	71	72	6	1	251	22
25ARDD004	43	44	27	2	4798	39	25ARDD004	72	73	3	1	177	23
25ARDD004	44	45	104	1	2124	57	25ARDD004	73	74	9	1	254	19
25ARDD004	45	46	20	20	3544	66	25ARDD004	74	75	9	6	128	84
25ARDD004	46	47	2695	22	5924	44	25ARDD004	75	76	<LOD		<LOD	30
25ARDD004	47	48	2434	3	2720	32	25ARDD004	76	77	23	1	447	24
25ARDD004	48	49	173	10	884	67	25ARDD004	77	78	6	1	264	26
25ARDD004	49	50	1212	3	6998	60	25ARDD004	78	79	10	1	259	22
25ARDD004	50	51	213	5	4670	41	25ARDD004	79	80	5	1	163	27
25ARDD004	51	52	623	3	3221	49	25ARDD004	80	81	30	1	479	22
25ARDD004	52	53	257	3	3652	36	25ARDD004	81	82	<LOD	7	142	22
25ARDD004	53	54	240	3	2199	45	25ARDD004	82	83	<LOD	6	150	29
25ARDD004	54	55	161	5	2657	63	25ARDD004	83	84	22	1	596	24
25ARDD004	55	56	338	2	4156	31	25ARDD004	84	85	7	1	127	32
25ARDD004	56	57	75	12	757	33	25ARDD004	85	86	14	1	720	21
25ARDD004	57	58	1002	1	1334	52	25ARDD004	86	87	<LOD	7	70	22
25ARDD004	58	59	21	4	2481	51	25ARDD004	87	88	5	1	149	28
25ARDD004	59	60	284	4	2645	51	25ARDD004	88	89	54	2	465	27
25ARDD004	60	61	223	3	3876	73	25ARDD004	89	90	55	2	591	30
Hole ID	From	To	As_ppm	As error	Cr_ppm	Cr Error	Hole ID	From	To	As_ppm	As error	Cr_ppm	Cr Error
25ARDD004	90	91	8	1	648	27	25ARDD004	120	121	12	1	423	26
25ARDD004	91	92	20	1	502	37	25ARDD004	121	122	<LOD	5	373	28
25ARDD004	92	93	11	1	1043	43	25ARDD004	122	123	5	1	417	43
25ARDD004	93	94	10	2	961	32	25ARDD004	123	124	27	2	1343	27
25ARDD004	94	95	20	1	768	28	25ARDD004	124	125	33	2	473	28
25ARDD004	95	96	6	1	512	87	25ARDD004	125	126	6	1	536	23
25ARDD004	96	97	<LOD	7	<LOD	29	25ARDD004	126	127	<LOD	5	206	30
25ARDD004	97	98	16	2	428	25	25ARDD004	127	128	7	1	594	19
25ARDD004	98	99	22	1	463	24	25ARDD004	128	129	<LOD	5	69	36
25ARDD004	99	100	<LOD	5	448	23	25ARDD004	129	130	5	1	945	28
25ARDD004	100	101	6	1	355	25	25ARDD004	130	131	5	1	448	18
25ARDD004	101	102	21	1	553	25	25ARDD004	131	132	23	2	219	28
25ARDD004	102	103	8	1	497	26	25ARDD004	132	133	43	2	527	25
25ARDD004	103	104	4	1	460	26	25ARDD004	133	134	32	2	337	30
25ARDD004	104	105	53	2	475	23	25ARDD004	134	135	21	1	635	22
25ARDD004	105	106	22	1	348	22	25ARDD004	135	136	6	1	135	28
25ARDD004	106	107	31	1	344	23	25ARDD004	136	137	12	1	482	23
25ARDD004	107	108	21	1	410	26	25ARDD004	137	138	20	1	242	30
25ARDD004	108	109	9	1	387	33	25ARDD004	138	139	17	1	589	26
25ARDD004	109	110	103	2	833	28	25ARDD004	139	140	11	1	335	31
25ARDD004	110	111	22	1	497	26	25ARDD004	140	141	5	1	664	26
25ARDD004	111	112	81	2	476	25	25ARDD004	141	142	14	1	359	25
25ARDD004	112	113	24	1	359	41	25ARDD004	142	143	12	1	313	20
25ARDD004	113	114	23	1	1282	21	25ARDD004	143	144	<LOD	5	86	30
25ARDD004	114	115	15	1	126	23	25ARDD004	144	145	<LOD	5	578	24
25ARDD004	115	116	193	3	307	24	25ARDD004	145	146	5	1	247	30
25ARDD004	116	117	744	8	328	27	25ARDD004	146	147	5	1	572	30
25ARDD004	117	118	15	1	392	27	25ARDD004	147	148	12	1	542	22
25ARDD004	118	119	9	1	422	23	25ARDD004	148	149	5	1	199	74
25ARDD004	119	120	6	1	199	27	25ARDD004	149	150	<LOD	5	<LOD	27
Hole ID	From	To	As_ppm	As error	Cr_ppm	Cr Error	Hole ID	From	To	As_ppm	As error	Cr_ppm	Cr Error
25ARDD004	150	151	27	2	503	29	25ARDD005	18	19	<LOD	5	759	32
25ARDD004	151	152	<LOD	5	590	22	25ARDD005	19	20	19	1	992	36
25ARDD004	152	153	<LOD	5	147	26	25ARDD005	20	21	4	1	618	31
25ARDD004	153	154	<LOD	6	379	25	25ARDD005	21	22	32	1	799	31
25ARDD004	154	155	3	1	356	25	25ARDD005	22	23	16	1	753	31
25ARDD004	155	156	5	1	355	21	25ARDD005	23	24	9	1	671	32
25ARDD004	156	157	<LOD	5	174	21	25ARDD005	24	25	8	1	579	29
25ARDD004	157	158	<LOD	5	111	24	25ARDD005	25	26	5	1	613	29
25ARDD004	158	159	<LOD	5	312	21	25ARDD005	26	27	22	1	590	27
25ARDD004	159	160	<LOD	5	128	30	25ARDD005	27	28	51	1	257	20
25ARDD004	160	161	157	3	628	26	25ARDD005	28	29	4	6	102	19
25ARDD004	161	162	8	1	442	103	25ARDD005	29	30	<LOD	5	71	20
25ARDD005	0	1	24	2	315	23	25ARDD005	30	31	<LOD	5	101	19
25ARDD005	1	2	114	3	256	24	25ARDD005	31	32	<LOD	1	71	20
25ARDD005	2	3	39	2	379	27	25ARDD005	32	33	4	5	58	80
25ARDD005	3	4	15	1	323	23	25ARDD005	33	34	<LOD	1	<LOD	20
25ARDD005	4	5	32	4	183	22	25ARDD005	34	35	4	1	94	27
25ARDD005	5	6	<LOD	6	531	31	25ARDD005	35	36	15	1	464	23
25ARDD005	6	7	<LOD	5	743	33	25ARDD005	36	37	16	2	313	35
25ARDD005	7	8	3	1	372	28	25ARDD005	37	38	59	1	1131	31
25ARDD005	8	9	<LOD	6	559	31	25ARDD005	38	39	5	14	537	32
25ARDD005	9	10	<LOD	6	852	36	25ARDD005	39	40	471	1	821	48
25ARDD005	10	11	<LOD	5	267	23	25ARDD005	40	41	22	1	2393	46
25ARDD005	11	12	4	1	677	31	25ARDD005	41	42	9	1	2074	55
25ARDD005	12	13	<LOD	6	417	29	25ARDD005	42	43	5	1	2678	51
25ARDD005	13	14	4	1	642	31	25ARDD005	43	44	5	4	2390	51
25ARDD005	14	15	7	1	813	33	25ARDD005	44	45	95	2	3355	68
25ARDD005	15	16	<LOD	5	417	26	25ARDD005	45	46	30	1	4844	68
25ARDD005	16	17	12	1	639	30	25ARDD005	46	47	23	2	3720	53
25ARDD005	17	18	<LOD	5	489	28	25ARDD005	47	48	71	3	3529	44
Hole ID	From	To	As_ppm	As error	Cr_ppm	Cr Error	Hole ID	From	To	As_ppm	As error	Cr_ppm	Cr Error
25ARDD005	48	49	145	1	2462	46	25ARDD005	78	79	41	5	3444	72
25ARDD005	49	50	26	2	2177	56	25ARDD005	79	80	<LOD	1	5088	72
25ARDD005	50	51	46	1	2869	46	25ARDD005	80	81	7	1	4125	22
25ARDD005	51	52	13	1	2335	41	25ARDD005	81	82	5	12	163	39
25ARDD005	52	53	4	1	1776	50	25ARDD005	82	83	951	2	1982	35
25ARDD005	53	54	25	1	2568	57	25ARDD005	83	84	85	3	1063	50
25ARDD005	54	55	22	1	2323	58	25ARDD005	84	85	130	33	2688	39
25ARDD005	55	56	6	1	3432	35	25ARDD005	85	86	3460	3	2116	50
25ARDD005	56	57	4	5	1365	35	25ARDD005	86	87	185	3	2702	61
25ARDD005	57	58	<LOD	1	1149	36	25ARDD005	87	88	260	3	4196	46
25ARDD005	58	59	13	5	1358	37	25ARDD005	88	89	207	9	2556	33
25ARDD005	59	60	<LOD	1	1623	44	25ARDD005	89	90	861	1	1212	73
25ARDD005	60	61	5	5	1930	35	25ARDD005	90	91	113	4	6127	55
25ARDD005	61	62	<LOD	5	1409	45	25ARDD005	91	92	174	3	2126	48
25ARDD005	62	63	<LOD	5	2188	41	25ARDD005	92	93	387	2	4191	66
25ARDD005	63	64	<LOD	4	1837	38	25ARDD005	93	94	5	4	1594	55
25ARDD005	64	65	<LOD	5	1977	46	25ARDD005	94	95	75	1	7951	55
25ARDD005	65	66	<LOD	1	2817	38	25ARDD005	95	96	49	2	3604	68
25ARDD005	66	67	3	5	1980	39	25ARDD005	96	97	358	4	1154	38
25ARDD005	67	68	<LOD	5	1802	40	25ARDD005	97	98	24	1	1230	36
25ARDD005	68	69	<LOD	2	1828	65	25ARDD005	98	99	24	1	64	20
25ARDD005	69	70	5	1	4107	40	25ARDD005	99	100	122	2	55	18
25ARDD005	70	71	20	1	1815	42	25ARDD005	100	101	<LOD	5	<LOD	72
25ARDD005	71	72	5	2	2121	59	25ARDD005	101	102	<LOD	7	<LOD	79
25ARDD005	72	73	6	1	2813	51	25ARDD005	102	103	<LOD	6	<LOD	87
25ARDD005	73	74	7	1	3102	50	25ARDD005	103	104	4	1	<LOD	87
25ARDD005	74	75	7	5	3167	26	25ARDD005	104	105	12	1	<LOD	79
25ARDD005	75	76	<LOD	1	430	77	25ARDD005	105	106	7	1	<LOD	74
25ARDD005	76	77	22	1	7222	42	25ARDD005	106	107	10	1	<LOD	69
25ARDD005	77	78	9	1	1726	56	25ARDD005	107	108	5	1	<LOD	66
Hole ID	From	To	As_ppm	As error	Cr_ppm	Cr Error	Hole ID	From	To	As_ppm	As error	Cr_ppm	Cr Error
25ARDD005	108	109	4	1	<LOD	75	25ARDD005	138	139	<LOD	6	64	20
25ARDD005	109	110	11	1	<LOD	71	25ARDD005	139	140	4	1	56	19
25ARDD005	110	111	7	1	<LOD	67	25ARDD005	140	141	9	1	<LOD	87
25ARDD005	111	112	3	1	<LOD	68	25ARDD005	141	142	5	1	<LOD	74
25ARDD005	112	113	4	1	<LOD	68	25ARDD005	142	143	6	1	<LOD	76
25ARDD005	113	114	21	2	<LOD	99	25ARDD005	143	144	<LOD	6	<LOD	76
25ARDD005	114	115	3	1	<LOD	76	25ARDD005	144	145	4	1	<LOD	77
25ARDD005	115	116	<LOD	5	<LOD	72	25ARDD005	145	146	<LOD	6	<LOD	80
25ARDD005	116	117	132	3	<LOD	96	25ARDD005	146	147	4	1	77	20
25ARDD005	117	118	61	2	<LOD	98	25ARDD005	147	148	<LOD	5	<LOD	77
25ARDD005	118	119	424	5	<LOD	87	25ARDD005	148	149	4	1	<LOD	79
25ARDD005	119	120	100	2	<LOD	87	25ARDD005	149	150	<LOD	6	88	20
25ARDD005	120	121	105	3	151	18	25ARDD005	150	151	<LOD	6	<LOD	78
25ARDD005	121	122	92	2	<LOD	92	25ARDD005	151	152	4	1	<LOD	80
25ARDD005	122	123	16	2	<LOD	88	25ARDD005	152	153	<LOD	5	<LOD	79
25ARDD005	123	124	<LOD	6	<LOD	89	25ARDD005	153	154	4	1	<LOD	78
25ARDD005	124	125	<LOD	6	<LOD	89	25ARDD005	154	155	<LOD	6	<LOD	80
25ARDD005	125	126	7	1	160	21	25ARDD005	155	156	57	12	411	38
25ARDD005	126	127	6	1	<LOD	83	25ARDD005	156	157	<LOD	5	210	22
25ARDD005	127	128	7	1	<LOD	85	25ARDD005	157	158	6	1	846	35
25ARDD005	128	129	9	1	<LOD	83	25ARDD005	158	159	<LOD	5	246	23
25ARDD005	129	130	21	1	<LOD	78	25ARDD005	159	160	<LOD	6	510	29
25ARDD005	130	131	9	1	<LOD	84	25ARDD005	160	161	6	1	1188	41
25ARDD005	131	132	7	1	74	20	25ARDD005	161	162	13	1	603	31
25ARDD005	132	133	9	1	<LOD	90	25ARDD005	162	163	<LOD	6	<LOD	88
25ARDD005	133	134	9	1	<LOD	82	25ARDD005	163	164	15	1	669	31
25ARDD005	134	135	<LOD	6	<LOD	81	25ARDD005	164	165	<LOD	6	1124	41
25ARDD005	135	136	5	1	<LOD	78	25ARDD005	165	166	<LOD	6	273	24
25ARDD005	136	137	9	1	77	19	25ARDD005	166	167	69	2	809	33
25ARDD005	137	138	6	1	<LOD	92	25ARDD005	167	168	16	1	777	33
Hole ID	From	To	As_ppm	As error	Cr_ppm	Cr Error	Hole ID	From	To	As_ppm	As error	Cr_ppm	Cr Error
25ARDD005	168	169	7	1	449	27	25ARDD005	198	199	<LOD	6	154	24
25ARDD005	169	170	13	1	349	25	25ARDD005	199	200	6	1	705	31
25ARDD005	170	171	71	2	582	30	25ARDD005	200	201	<LOD	5	505	28
25ARDD005	171	172	16	1	197	22	25ARDD005	201	202	<LOD	5	328	25
25ARDD005	172	173	38	2	655	30	25ARDD005	202	203	9	1	410	27
25ARDD005	173	174	<LOD	5	180	22	25ARDD005	203	204	7	1	545	29
25ARDD005	174	175	4	1	200	22	25ARDD005	204	205	31	2	694	31
25ARDD005	175	176	20	1	301	24	25ARDD005	205	206	6	1	426	26
25ARDD005	176	177	<LOD	5	331	26	25ARDD005	206	207	<LOD	5	163	22
25ARDD005	177	178	14	1	520	29	25ARDD005	207	208	7	1	788	34
25ARDD005	178	179	56	2	599	30	25ARDD005	208	209	<LOD	5	451	27
25ARDD005	179	180	89	2	939	36	25ARDD005	209	210	4	1	838	31
25ARDD005	180	181	203	3	547	30	25ARDD005	210	211	<LOD	6	297	25
25ARDD005	181	182	6	1	219	23	25ARDD005	211	212	<LOD	5	226	24
25ARDD005	182	183	5	1	429	27	25ARDD005	212	213	4	1	530	27
25ARDD005	183	184	<LOD	5	173	22	25ARDD005	213	214	6	1	767	32
25ARDD005	184	185	<LOD	5	176	22	25ARDD005	214	215	<LOD	5	593	29
25ARDD005	185	186	<LOD	5	98	20	25ARDD005	215	216	28	2	919	36
25ARDD005	186	187	4	1	276	24	25ARDD005	216	217	<LOD	5	705	30
25ARDD005	187	188	4	1	606	31	25ARDD005	217	218	6	1	409	26
25ARDD005	188	189	<LOD	6	657	31	25ARDD005	218	219	6	1	569	29
25ARDD005	189	190	25	2	391	26	25ARDD005	219	220	6	1	420	27
25ARDD005	190	191	<LOD	6	492	29
25ARDD005	191	192	5	1	365	27
25ARDD005	192	193	9	1	788	33
25ARDD005	193	194	<LOD	6	532	30
25ARDD005	194	195	5	1	608	30
25ARDD005	195	196	<LOD	5	682	31
25ARDD005	196	197	<LOD	5	317	25
25ARDD005	197	198	<LOD	5	96	20

Table 2: pXRF readings showing As and Cr values from Titan Drilling (25ARDD003-25ARDD005) - pending laboratory assays.

JORC Code, 2012 Edition - Table 1

Section 1 Sampling Techniques and Data (Criteria in this section apply to all succeeding sections.)

Criteria	JORC Code explanation	Commentary
Sampling techniques	· Nature and quality of sampling (eg cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc). These examples should not be taken as limiting the broad meaning of sampling. · Include reference to measures taken to ensure sample representivity and the appropriate calibration of any measurement tools or systems used. · Aspects of the determination of mineralisation that are Material to the Public Report. · In cases where 'industry standard' work has been done this would be relatively simple (eg 'reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay'). In other cases more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (eg submarine nodules) may warrant disclosure of detailed information.	· Portable XRF has been used on downhole 1m intervals by analyzing drill core · Portable XRF is calibrated daily along with CRM checks during analysis · Portable XRF results were used for geochemical rather than mineralization purposes, with a focus on As an indicator for potential Au mineralization. Highest As value recorded was 3460ppm. Cr was used as a guide for lithological constraints identifying potential ultramafic units, the highest value recorded was 14175ppm. · Half core drill samples were bagged and dispatched to the ALS Global Perth Laboratory for analysis. · These were exploratory drill holes with the primary aim to identify or not mineralization associated with surface anomalies, electro magnetic conductor plates, and extension to the existing Carlow Castle deposit. · Selective sampling was conducted on the 25ARDD001, 25ARDD002 and 25ARDD005 holes targeting mineralized zones as determined by the onsite geology team. · 25ARDD003-004 have been fully sampled.
Drilling techniques	· Drill type (eg core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple or standard tube, depth of diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what method, etc).	· Diamond drill hole 25ARDD001 was drilled at 70⁰ dip and 0⁰ azimuth with a pre-collar HQ core from surface to 50m and NQ to end of hole at 714.6m · Diamond drill hole 25ARDD002 was drilled at 60⁰ dip and 340⁰ azimuth with a pre collar HQ core from surface to 24.3m and NQ to end of hole at 527.4m · Diamond drill hole 25ARDD003 was drilled at 50⁰ dip and 045⁰ azimuth with a pre collar HQ core from surface to 99.9m and NQ to end of hole at 148.4m. · Diamond drill hole 25ARDD004 was drilled at 65⁰ dip and 045⁰ azimuth and was drilled HQ to end of hole at 162,5m · Diamond drill hole 25ARDD005 was drilled at 70⁰ dip and 045⁰ azimuth and was drilled HQ from surface to end of hole at 237.3m · A Sandvik DE-710 track mounted multi-purpose drill rig operated by West Core was used.
Drill sample recovery	· Method of recording and assessing core and chip sample recoveries and results assessed. · Measures taken to maximise sample recovery and ensure representative nature of the samples. · Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material.	· Core recovery has been measured from drillers run blocks with % of the sample intervals recovered. · Diamond core has been reconstructed into continuous runs with depths checked against the depths given on the drillers core blocks. · The geologist visually assessed drill core recoveries and these were recorded and were generally good except in the oxidation zones. · The core was recovered using a standard core barrel and the core was placed into core trays, · Only selected intervals of core were selected for analysis
Logging	· Whether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies. · Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc) photography. · The total length and percentage of the relevant intersections logged.	· All five holes were geologically logged for lithology, weathering and other features. The level of geological details is commensurate with the nature and limitations of this exploratory drilling technique. · The drilling was supervised by a consultant of Artemis Resources and using experienced geological contractors provided by APEX Geoscience. · These are isolated exploratory drill holes which renders the assay results unsuitable for Resource Estimation. Although data acquired from this program would compliment future drilling and could assist with Resource Estimation. · Data relating to the geological observations and the sampling intervals was entered in a database and the core is stored at the core shed located at Karratha. · Selected samples will be sent for petrographic analysis at a later date to confirm lithological descriptions.
Sub-sampling techniques and sample preparation	· If core, whether cut or sawn and whether quarter, half or all core taken. · If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled wet or dry. · For all sample types, the nature, quality and appropriateness of the sample preparation technique. · Quality control procedures adopted for all sub-sampling stages to maximise representivity of samples. · Measures taken to ensure that the sampling is representative of the in situ material collected, including for instance results for field duplicate/second-half sampling. · Whether sample sizes are appropriate to the grain size of the material being sampled.	· The mineralized sections of HQ and NQ core were sawn in half, with half core samples sent for analysis. · Where core loss was encountered in potentially mineralized zones samplers were composited, this applies to 25ARDD003-25ARDD005. · The samples were then sent to ALS Global Laboratory in Perth for sample preparation and analysis using MEMS61 and 50g fire assay techniques. · The sample sizes were appropriate for the style of mineralisation being investigated.
Quality of assay data and laboratory tests	· The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total. · For geophysical tools, spectrometers, handheld XRF instruments, etc, the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc. · Nature of quality control procedures adopted (eg standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (ie lack of bias) and precision have been established.	· Laboratory Certified Reference Materials and/or in-house controls, blanks, splits and replicates are analysed with each batch of samples by the laboratory. These quality control results are reported along with the sample values in their final report. Selected samples are also re-analysed to confirm anomalous results. · Assay results from the samples taken are not yet available.
	·	·
Verification of sampling and assaying	· The verification of significant intersections by either independent or alternative company personnel. · The use of twinned holes. · Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols. · Discuss any adjustment to assay data.	· Drill collar data, sample information, logging data and assay results are yet to be completed, compiled, and validated by a separate person to the person conducting the logging and sampling. · Data is stored electronically in a database managed by Artemis Resources.
Location of data points	· Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation. · Specification of the grid system used. · Quality and adequacy of topographic control.	· A hand held DGPS will be used to record the collar location and RL of the drill hole. · Down hole orientation surveys were completed on the drill hole at approximately 30m intervals and a final continuous survey once each hole had been completed. · The grid system used is GDA94, MGA zone 50.
Data spacing and distribution	· Data spacing for reporting of Exploration Results. · Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied. · Whether sample compositing has been applied.	· The samples have been taken from isolated drill holes which were drilled to test and identify the source of a strong electro magnetic conductor (25ARDD001), high grade extensional plunge to the East of Carlow Castle deposit (25ARDD002) and potential extent of mineralization at Titan based on high grade surface samples (25ARDD003-25ARDD005)
Orientation of data in relation to geological structure	· Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type. · If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material.	· The regional stratigraphy and known mineralization trends at Carlow have an East-West strike and dip steeply (60⁰-70⁰), regional stratigraphy has a steep dip 70⁰ to the south. · Sampling bias is not considered an issue with respect to the core sampling of these exploratory drill holes. The relationship of lithology within both drill holes to the regional geological trends in subject to ongoing investigation and is not reported. · The true orientation of mineralized bodies at Carlow are known, however, this is not the case at Titan, so an assessment of the effect of drill orientation on sample bias can be made if further drilling is undertaken.
Sample security	· The measures taken to ensure sample security.	· All drill samples collected from this drill hole were freighted by Artemis Resources directly to the ALS Global laboratory in Perth for analysis. · Sample security was not considered a significant risk to the project. Only employees or contractors of Artemis Resources were involved in the collection, short term storage (in a remote area), and delivery of samples.
Audits or reviews	· The results of any audits or reviews of sampling techniques and data.	· No formal audits or reviews have been conducted on sampling technique and data to date.

Section 2 Reporting of Exploration Results

(Criteria listed in the preceding section also apply to this section.)

Criteria	JORC Code explanation	Commentary
Mineral tenement and land tenure status	· Type, reference name/number, location and ownership including agreements or material issues with third parties such as joint ventures, partnerships, overriding royalties, native title interests, historical sites, wilderness or national park and environmental settings. · The security of the tenure held at the time of reporting along with any known impediments to obtaining a licence to operate in the area.	· The drill holes are part of a larger program being entirely conducted on E47/1797 held 100% by Artemis Resources. · The tenement lies within the Ngarluma Native Title claim, with Heritage clearance having been completed. There is no heritage issues associated with the drill sites. · The Tenement is in good standing with no known impediments.
Exploration done by other parties	· Acknowledgment and appraisal of exploration by other parties.	For previous exploration history please refer to Artemis announcement 13^th October 2022.
Geology	· Deposit type, geological setting and style of mineralisation.	· For previous description of geology for Carlow Castle mineral resource, refer to Artemis announcement 13^th October 2022.
Drill hole Information	· A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes: o easting and northing of the drill hole collar o elevation or RL (Reduced Level - elevation above sea level in metres) of the drill hole collar o dip and azimuth of the hole o down hole length and interception depth o hole length. · If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case.	· The drill hole collar locations are shown in diagrams in the body of the release. Drilling was conducted at the natural land surface. Elevation of the drill hole to be determined from a handheld DGPS instrument with an accuracy of +/- 0.1m. · Diamond drill hole 25ARDD001 was drilled at 70⁰ dip and 0⁰ azimuth, depth hole is 714.6m · Diamond drill hole 25ARDD002 was drilled at 60⁰ dip and 340⁰ azimuth, depth of hole is 527.4m · Diamond drill hole 25ARDD003 was drilled at 50⁰ dip and 045⁰ azimuth depth of hole is 148.4m. · Diamond drill hole 25ARDD004 was drilled at 65⁰ dip and 045⁰ azimuth depth of hole is 162,5m · Diamond drill hole 25ARDD005 was drilled at 70⁰ dip and 045⁰ depth of hole is 237.3m
Data aggregation methods	· In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (eg cutting of high grades) and cut-off grades are usually Material and should be stated. · Where aggregate intercepts incorporate short lengths of high grade results and longer lengths of low grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail. · The assumptions used for any reporting of metal equivalent values should be clearly stated.	· No data aggregation was used in this report.
Relationship between mineralisation widths and intercept lengths	· These relationships are particularly important in the reporting of Exploration Results. · If the geometry of the mineralisation with respect to the drill hole angle is known, its nature should be reported. · If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (eg 'down hole length, true width not known').	· The holes drilled were exploratory in nature and the relationship between the reported minerals and the angle of the drill holes is not known precisely. No mineralisation intercepts have been reported in this document.
Diagrams	· Appropriate maps and sections (with scales) and tabulations of intercepts should be included for any significant discovery being reported These should include but not be limited to a plan view of drill hole collar locations and appropriate sectional views.	· The drilling has been tabulated into a generalised section.
Balanced reporting	· Where comprehensive reporting of all Exploration Results is not practicable, representative reporting of both low and high grades and/or widths should be practiced to avoid misleading reporting of Exploration Results.	· No assay results have been received for any of the mineralised drill samples.
Other substantive exploration data	· Other exploration data, if meaningful and material, should be reported including (but not limited to): geological observations; geophysical survey results; geochemical survey results; bulk samples - size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances.	· The drill holes were designed to test a number of targets including an EM conductor plate, high grade mineralisation trends to the east of Carlow and extent to high grade surface rock chip samples.
Further work	· The nature and scale of planned further work (eg tests for lateral extensions or depth extensions or large-scale step-out drilling). · Diagrams clearly highlighting the areas of possible extensions, including the main geological interpretations and future drilling areas, provided this information is not commercially sensitive.	· On receipt of analytical results from ALS Global, Artemis will evaluate the results in combination with geological and structural data to determine whether follow up drilling is required at the three targets described in this announcement.

This information is provided by RNS, the news service of the London Stock Exchange. RNS is approved by the Financial Conduct Authority to act as a Primary Information Provider in the United Kingdom. Terms and conditions relating to the use and distribution of this information may apply. For further information, please contact rns@lseg.com or visit www.rns.com.

RNS may use your IP address to confirm compliance with the terms and conditions, to analyse how you engage with the information contained in this communication, and to share such analysis on an anonymised basis with others as part of our commercial services. For further information about how RNS and the London Stock Exchange use the personal data you provide us, please see our Privacy Policy.

END

DRLBSGDXGBBDGUI

TIDM	ARV
Share Price	Loading...
Market Cap	Loading...

Date	19 Mar 2025
Time	07:00:02
Category	Corporate updates
ID	1669B

TIDM	ARV
Share Price	Loading...
Market Cap	Loading...

Date	19 Mar 2025
Time	07:00:02
Category	Corporate updates
ID	1669B

t

t

Company Information

AI Summary

RNS Metadata

Carlow Tenement - Phase One Drilling Completed